This article will explain what phantom power is and why the SM58 does not need it, whether or not phantom power can harm a dynamic microphone, and what the Shure SM58 … If that's where you are at but it is still sounding too quiet, turn your headphones up. Nonetheless, applying phantom power will not damage other microphones in the vast majority of cases. FAQ. No, the Shure SM58 microphone does not require phantom power simply because it does not have any active circuitry within it. Condenser mics are the only mics that require phantom power. I'll definitely keep it in mind for the future. The scarlett was working great with an AKG perception I had (although it wasn't as sensitive as I expected). Huh, there were so many people suggesting these go well together for beginners. So output volume to my headphones is usually just fine. A professional, balanced, dynamic microphone will not be damaged by phantom power. Additionally, because of the way the power flows through the pins of an XLR cord, a normally working mic and cable will not result in a dynamic mic being damaged by having phantom power turned on. You need at least +60db gain to drive SM58 at a reasonable level. A dynamic microphone, like the SM58, does not require phantom power because it does not have active electronics inside. But most dynamic mics, particularly modern ones are designed to be able to accept phantom power and simply not use it. Attachment Link(s) Last Edit Date. The same result. The signal is healthy. So things seem more quiet than they really are. It will "ignore" it. 1/29/2019. The reason is that modern dynamic microphones are designed to accept phantom power without issues, but we advise checking your manual or consulting with the manufacturer first … Mar 7, 2020 • Knowledge. By using our Services or clicking I agree, you agree to our use of cookies. I have an SM57 and an Audio Technica microphone that requires phantom power, and I'm wondering if I run my phantom power through the SM57 if any damage will come from it? Nonetheless, applying phantom power will not damage other microphones in the vast majority of cases. It can damage dynamic or ribbon mics. I tried it with Scarlett 2i2. I definitely have phantom power on. Press question mark to learn the rest of the keyboard shortcuts, RE20 -> AEA TRP -> UAD Apollo Twin -> some software -> your ears. It may sound quiet, but if your signal is above - 40 db, you're probably fine. Related Articles. The scarlett was working great with an AKG perception I had (although it wasn't as sensitive as I expected). I actually have an JDSlabs O2 amp connected to my Scarlett 2i2. Whilst dynamic microphones don’t require phantom power to operate, this does not mean phantom power will damage them. I am using windows 10, and I have the recording volume in my sound settings at max. On the other hand, dynamic mics—the ubiquitous Shure SM57 and SM58 mics, for example—do not require power. But I appreciate it. Now I recently got a used SM58 (in excellent condition), which sounds great, but seems to need max gain on my Scarlett 2i2 to … Answer. People generally use cardioid microphones because they’re versatile and forgiving in terms of placement. Quote: Originally Posted by Retinal. I definitely have phantom power on. It's a fact, go ahead, and yes any kind of dynamic mic won't be damaged … Look into a cloudlifter CL1 if you want to add some gain before your interface. I assumed the Scarlett had more than enough juice to comfortably push the SM58s. It's perfectly safe to apply phantom power to modern ribbon mics, like the Oktava ML52, and dynamic mics, like the Sennheiser e903, provided you use good quality XLR-XLR cables. It is often more cost effective to replace the entire microphone. The SM57 is a dynamic microphone. Share Reply Quote. First, you don't need Phantom power for an sm58. You will for the akg but it makes no difference at all for the sm58. When recording, I try to keep my signal peaks been - 20 and - 10. The problem I've had with the 2i2 is it doesn't have the greatest headphone amp. Yeah. So there you have it! The Shure SM58 is a dynamic cardioid microphone. It can damage dynamic or ribbon mics. Second, digital recording (especially 24 bit) doesn't require a strong signal to sound clear. Concluding Remarks. Are there any cheaper alternatives to the Cloudlifter? But even though the volume can be raised in recordings, in something like... a voice chat, lower volumes can be annoying. Although uncommon, some SM58's come with a built-in on/off switch on the handle. Dynamic mics usually need a ton of gain to get a usable signal. You can work a dynamic microphone perfectly fine without the need for phantom power. New comments cannot be posted and votes cannot be cast, More posts from the microphones community, Press J to jump to the feed. Lives for gear . Condenser mics are the only mics that require phantom power. It’s easy to get thrown off by all the syllables but all this means is that it’s durable, doesn’t require phantom power, and performs best when recording what’s in front of it. Will phantom power damage my SM58? The balanced XLR cable ensured the power passed through without affecting the SM58 in any way. The SM58 is a dynamic mic and does not require phantom power. The Cloudlifters are a bit on the expensive side for me right now, so i'll just have to be closer to the mic. Whilst dynamic microphones don’t require phantom power to operate, this does not mean phantom power will damage them. Most of audio interfaces provide upto 40 to 45db's gain. It is only natural to think that running power into something that doesn’t need it will probably break it. If your microphone has an on/off switch, check that the switch is in the on position. So keep track of the level of your input with your software. Now I am using cloudlifter with great satisfaction. It is easy to damage the capsule when you remove it. My Recordings/Credits My Studio. Fields. It's a fact, go ahead, and yes any kind of dynamic mic won't be damaged by phantom power, actually, not even modern ribbon mic get damaged by it. Check the specifications. Cookies help us deliver our Services. 27th November 2010 | Show parent #7. mista min. Now I recently got a used SM58 (in excellent condition), which sounds great, but seems to need max gain on my Scarlett 2i2 to get an acceptable recording volume. The SM58 is a dynamic mic and does not require phantom power. A dynamic microphone, like the SM58, does not require phantom power because it does not have active electronics inside. Phantom power is a way to provide power to microphones—that need electricity to operate, but that don’t have a dedicated AC power source. 3 Reviews written.